Compatible with all Axis network video products. It can be used to connect two Ethernet cable with a…
Brand:
Axis
Code:
ART-45607
MPN
5503-771
EAN
7331021003743
Compatible with all Axis network video products. It can be used to connect two Ethernet cable with a male RJ-45 connector. Distance limitation: up to 100m.
The clip, made of steel, enables mounting on a standard 35mm DIN rail. The kit includes a DIN Rail…
Brand:
Axis
Code:
ART-43780
MPN
5503-194
EAN
7331021001343
The clip, made of steel, enables mounting on a standard 35mm DIN rail. The kit includes a DIN Rail Clip with a mounting plate and screws for attaching the device to the clip.
Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed…
Brand:
Axis
Code:
ART-40622
MPN
5025-281
EAN
7331021003972
Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance, a switch is normally used as a repeater, or optical fiber may be used. To overcome this distance limit, network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable, and forward the rest to the camera. Dependent on midspan and camera type, the connection in total can be between 200-400 meters (656-1312 ft.). Compatibility AXIS T8129 PoE Extender is compatible with all Axis network video products supporting PoE, and it is both IEEE 802.3af and IEEE 802.3at compliant. Check in the Set-up tab for information typical connections with Axis network video products. Range Range depends on the power required, so a 25 watt PTZ dome camera may be located 200 m (656 ft.) away using a single AXIS T8129. Or, the cable length to a regular 5 watt network camera may extend up to 400 m (1312 ft.), by fitting three AXIS T8129 at 100 m (328 ft.) intervals. Check in the Range tab for information about Maximum distances. No additional power supply AXIS T8129 does not require any additional power supply and the connected network camera is fed by a single PoE switch or midspan. It offers two female Ethernet ports, which are both configured automatically for link speed, duplex and crossover and the full-rate network throughput is maintained.
Easier and faster installations Power over Ethernet (PoE) offers an easy, fast and cost-effective…
Brand:
Axis
Code:
ART-40620
MPN
5026-222
EAN
7331021003569
Easier and faster installations Power over Ethernet (PoE) offers an easy, fast and cost-effective solution for supplying power to network video products without the need to install power outlets and electrical cabling. No need for power outlets With the use of Axis PoE products, Axis network cameras and video encoders can receive both data and power over a single Ethernet cable. Network video products can thus be installed in areas where traditional power cabling and outlets are unavailable or difficult to install. Axis PoE midspans and PoE splitters Axis PoE midspans provide power (max. 15.4 W per port) over Ethernet cables to network video products with built-in Power over Ethernet support. For network video products without built-in PoE support, a PoE splitter must be used to separate power and data coming over the network cable. Axis PoE midspans and PoE splitters are IEEE 802.3af compliant, which ensures compatibility with all Axis products that have built-in support for Power over Ethernet. Note: For network cameras such as PTZ (pan/tilt/zoom) and PTZ dome cameras that require higher power than what PoE products can provide, High PoE midspans and splitters are available.