Easy to set up and use, the Cisco 300 Series Switches provide the ideal combination of affordability…
Brand:
Cisco
Code:
ART-26514
MPN
SRW208-K9-G5
EAN
8826582960622
Easy to set up and use, the Cisco 300 Series Switches provide the ideal combination of affordability and capabilities for small businesses, and help create a more efficient, better-connected workforce. The Cisco 300 Series, part of the Cisco Small Business line of network solutions, is a portfolio of managed switches that provides a powerful, reliable foundation for small business networks. Powerful Features and Performance All Cisco 300 Series Switches support the advanced security management capabilities and network features needed to support business-class data, voice, security, and wireless services. These switches support long-term investments and advanced features, such as quality of service, Layer 3 static routing, and IPv6. Cisco 300 Series Switches offer: - An Eco-Friendly Solution: Optimize power usage for efficiency, without compromising performance - Easy Setup and Management: Intuitive browser-based tools simplify setup and configuration - Peace of Mind: All Cisco 300 Series switches are protected for the life of the product by the Cisco Limited Lifetime Hardware Warranty with next business day advance replacement, where available - Easy to Order: Easily order the product you need with the following ordering part numbers: SRW208-K9-NA, SRW208G-K9-NA, SRW208P-K9-NA, SRW208MP-K9-NA, SRW224G4-K9-NA, SRW224G4P-K9-NA, SRW248G4-K9-NA, SRW248G4P-K9-NA, SRW2008-K9-NA, SRW2008P-K9-NA, SRW2008MP-K9-NA, SRW2016-K9-NA, SRW2024-K9-NA, SRW2024P-K9-NA, SRW2048-K9-NA
Gli switch a 10 porte Gigabit Ethernet hanno fino a un massimo di 3 connettori Gigabit Ethernet…
Brand:
Microsens
Code:
ART-24040
MPN
MS650869PM-48-V2
EAN
-
Gli switch a 10 porte Gigabit Ethernet hanno fino a un massimo di 3 connettori Gigabit Ethernet (slot SFP) per la fibra ottica (supporto dual-speed: 100Base-FX e 1000Base-X), permettendo la costruzione di anelli in fibra ottica. Nel caso si presenti un guasto, un meccanismo brevettato da MICROSENS facilita la riconfigurazione automatica in meno di 20ms. Inoltre gli switch industriali della linea Profi Line operano in range di temperatura tra -20..+60° garantendo affidabilità e robustezza. • Supporto della tecnologia ad anello con riconfigurazione automatica in caso di guasto inferiore a 20ms • Supporto VLAN, QoS, IGMP-Snooping, STP/RSTP etc. • Management via Web-/SNMP-/CLI o NMP-software • Switch con slot SFP a 100/1000 Mbps • Funzionalità PoE sulle porte Rj45 • Range di temperature supportate: -20..+60 °C, (versione MS650869PMX-48: -40..+75 °C)
The new Profi Line Modular switches from MICROSENS offer top performance and flexibility in confined…
Brand:
Microsens
Code:
ART-130108
MPN
MS652119PM-V2
EAN
-
The new Profi Line Modular switches from MICROSENS offer top performance and flexibility in confined spaces. The modular design of the Profi Line Modular switches enables expansions tailored to needs, which limits the initial investment to the minimum necessary. Even the base switch module offers thirteen gigabit ports, of which four, as combo ports, can be expanded to fiber optic connections. Despite its space-saving design, it has two alarm inputs/outputs, for example for cabinet monitoring or integrating a sensor/actuator. The copper ports offer PoE/PoE+ with which the terminal devices connected can be supplied with electricity economically and without additional cabling work. The switches themselves can also work without their own power supply, supplied via PoE/PoE+ as powered devices. For maximum scalability, expansion modules with six or twelve Gigabit Ethernet ports are available that can simply be connected on the side to match demand. The expansion modules also have gigabit combo ports with which an impressive number of fiber optic connections can be achieved economically and in relation to usage. - Gigabit performance with Energy-Efficient Ethernet - Power-over-Ethernet+ (802.3at),maximum of 30 W per port - Extended temperature range - Compact metal housing for DIN rail assembly - Robust design, extension modules available - Redundant power inputs - Linux kernel, open standards, long-term availability - SD card for firmware and configuration - Fault tolerance with minimum recovery times
Every wireless Local Area Network (LAN) deployment is different. When engineering an in-building…
Brand:
Cisco
Code:
ART-06642
MPN
AIR-ANT1729
EAN
-
Every wireless Local Area Network (LAN) deployment is different. When engineering an in-building solution, varying facility sizes, construction materials, and interior divisions raise a host of transmission and multipath considerations. When implementing a building-to-building solution, distance, physical obstructions between facilities, and number of transmission points must be taken into account. Cisco is committed to providing not only the best access points, client adapters, and bridges in the industry—it is also committed to providing a complete solution for any wireless LAN deployment. That's why Cisco has the widest range of antennas, cable, and accessories available from any wireless manufacturer.
- Adds 10 Gigabit Ethernet "short-reach" LC fiber connectivity to the standard SFP+ interfaces -…
Brand:
Netgear
Code:
ART-18069
MPN
AXM761-10000S
EAN
606449064131
- Adds 10 Gigabit Ethernet "short-reach" LC fiber connectivity to the standard SFP+ interfaces - Fits into the two built-in 10 GE SFP+ interfaces of GSM72xxPS / GSM73xxS - Fits into the 10 GE SFP+ interface of SFP+ Adapter module AX743
With Power over Ethernet (PoE) it is possible to supply ending devices via network cable not only…
Brand:
Allnet
Code:
ART-49018
MPN
ALL048900V2
EAN
4038816112279
With Power over Ethernet (PoE) it is possible to supply ending devices via network cable not only with data but also with power. This means that you do not only save a power supply, it is now possible to install the ending devices at places with no power sockets. PoE holds a big savings potential. The ALLNET LT PoE products support the IEEE802.3af standard with a performance of 15.4 watts, the IEEE802.3at standard with 30 watts and the LT PoE standard with 90 watts performance. The ALLNET product series recognizes active PoE end devices automatically and supplies them wit PoE depending on the capacity requirement. Due to the combination of switch/injector, repeater and splitter it is possible to enable distances of more than 500 meters. Not PoE capable devices can still be supplied with up to 25V power after this distance. With the CAT6 cables it is therefore achievable to transport performances up to 90 watts via PoE. Highlights: - support IEEE802.3, IEEE802.3u, IEEE802.ab,IEEE802.3af, IEEE802.3at and LT PoE 90W - 1 Port 10/100/1000 Base-T (Data) for connection to a switch, and - 1 Port 10/100/1000 Base-T (Power/Data) for connection to a PoE Device (PD) - Automatic detection of whether the connected device is PoE capable With the ALLNET ALL048900V2 High Power PoE Injector you install your PoE-enabled IP devices such as wireless access points, VoIP phones and much more totally independent of existing electrical outlets. So you can choose the best locations for example WLAN access points installations in a building regarding the wireless technology, without having to worry about power cabling. Non-PoE switches can be efficiently „upgraded“ with Power over Ethernet, especially when you only need a few ports with PoE power supply. Here the ALL048900V2 saves the expensive purchase of a PoE switch. The ALLNET ALL048900V2 supports the IEEE802.3af standard with a power of 15,4 Watt, the IEEE802.3at high power standard with 30 Watt and the LT PoE with 90 Watt power. The ALL048900V2 must not be configured. It has an RJ45 jack and an RJ-45 output connector, which are connected to this switch and the end device to the PoE injector. The cable length can here, as usual in Ethernet, up to 100 meters between the switch and terminal in total. The compact design and the metal case of the ALLNET ALL048900V2 can be very inconspicuous installed and is extremely robust.
10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x…
Brand:
Microsens
Code:
ART-09683
MPN
MS650869M-V2
EAN
-
10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x 10/100Base-TX, 3x 1000Base-X, SFP slot 3 x SFP, 8 x RJ-45, 2 x power supply · Gigabit Ethernet 10 Port Switch, 7x 10/100Base-TX, 1x10/100/1000-T, 2x 1000Base-SX/LX · 2 Fiber ports for building fault tolerant fiber rings · Manageable with Device Manager, SNMP optional · Full VLAN functionality / data prioritization according to IEEE 802.1q · Reconfiguration time · Optional with SFP · Robust casing in industrial design with integrated holder for 35 mm hat The new 10 port Gigabit Switch is equipped with two 1000Base-SX/LX Gigabit Ethernet fiber optic interfaces and therefore allows the implementation of a fault tolerant optical ring. In case of failure the MICROSENS patented technology assures the reconfiguration of the connection within less than 20 ms.
Intelligent WISP Control Point with FiberProtect™ The EdgePoint™ offers an innovative…
Brand:
UBIQUITI
Code:
ART-77982
MPN
EP-S16-EU
EAN
00810354024283
Intelligent WISP Control Point with FiberProtect™ The EdgePoint™ offers an innovative combination of robust routing performance, fiber backhaul capability, and the convenience of passive PoE support. Breakthrough in Tower Deployment The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI), greatly improve data signal integrity, and consolidate the wired data backhaul to a single fiber cable run for long-distance connectivity. Purpose-Built for WISP Control The first application-specific designed WISP control point, the EdgePoint combines the advanced routing capabilities of EdgeMAX® with fiber backhaul and versatile powering capabilities. All-in-One Design A single, compact controller eliminates clutter, expensive cabinets, extraneous installations, and excessive maintenance. Advanced Routing Applications Powerful routing features – such as link balancing – provide redundancy and increased performance for outdoor wireless links.
- Non-Blocking Throughput Switching Performance - Gigabit Ethernet RJ45 and SFP+/SFP Ports - Auto-Sensing IEEE 802.3af/at PoE Advanced Switching Technology for the Masses Build and expand your network with Ubiquiti Networks® EdgeSwitch™, part of the EdgeMAX® line of products. The EdgeSwitch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks. The EdgeSwitch offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability. Switching Performance The EdgeSwitch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. For its total, non-blocking throughput, the 24-port models support up to 26 Gbps, while the 48-port models support up to 70 Gbps. PoE+ Flexibility The EdgeSwitch models are available with 24 or 48 PoE Gigabit Ethernet ports of auto-sensing IEEE 802.3af/at or configurable 24V Passive PoE to simplify your infrastructure. By default, the EdgeSwitch automatically detects 802.3af/at devices so they automatically receive PoE. For 24V Passive PoE devices, manually enable 24V passive PoE using the EdgeS(more...)
Powerful Enterprise Switch Models The UniFi® Switch delivers the forwarding capacity to…
Brand:
UBIQUITI
Code:
ART-63519
MPN
US-24-250W-EU
EAN
00810354023149
Powerful Enterprise Switch Models The UniFi® Switch delivers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. Total non-blocking throughput: up to 26 Gbps for 24-port models and up to 70 Gbps for 48-port models. Advanced Port Management Each switch port offers custom settings: port name, PoE, network/VLAN configuration, and operation mode (switching, mirroring, or aggregate). Optical Fiber Connectivity Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps. Convenient PoE+ Support The UniFi® Switch features auto-sensing IEEE 802.3af/at and 24V passive PoE to power multiple devices on the network. Seamless Integration The UniFi® Switch integrates seamlessly into the UniFi Software-Defined Networking (SDN) platform to create a highly scalable, end-to-end system of network devices across multiple locations — all controlled from a single interface.