Allnet-Italy | Products | Network & Wireless | Accessories

Categorie

Network & Wireless

Server

Accessories

Media Converter

Power injector

Transceivers

Cable

Mounting Kit

power supplies

Expansion boards

Case

Other

Uninterruptible power supplies

Switching

Routing

Wireless

XPON

Network Tester

Licences & Warranties

Filters

close

Manufacturer

• Allnet
• AVM
• Cambium Networks
• Cisco
• Grandstream
• Microsens
• MikroTik
• MIMOSA
• NetAlly
• QNAP
• Red Lion
• Siklu
• Synergy21 Cablaggio
• TP-Link
• UBIQUITI

Reset filters

Go to Results

Articoli 230

Products per page

12 24 36 48

Brand

Stock available End User Best Price

Ubiquiti Networks ETH-SP-G2 White surge protector

UBIQUITI

ART-108714

MPN: ETH-SP-G2

EAN   00817882023900

ESD Protection for Outdoor High-Speed Networks Introducing the Ethernet Surge Protector, model ETH-SP, from Ubiquiti Networks. The ETH-SP is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti® airMAX® devices already have robust ESD protection built in, adding the ETH-SP to the installation provides an additional layer of protection to the network. The ETH-SP is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility. Ideal for WISP Networks All Ubiquiti airMAX devices are equipped with ESD protection. However, to protect outdoor devices, and to meet certain local code requirements, installing the ETH-SP is essential. For example, to guard against costly service calls, and to help your subscriber installations meet code requirements, install two ETH-SPs: one near the CPE, and the other at the entry point to the building. Damaging ESD attacks and surges will be absorbed by the ETH-SPs and safely discharged into the ground.

Ubiquiti Networks ETH-SP-G2 White surge protector

ESD Protection for Outdoor High-Speed Networks Introducing the Ethernet Surge Protector, model…

Brand: UBIQUITI

Code: ART-108714

MPN

ETH-SP-G2

EAN 00817882023900

ESD Protection for Outdoor High-Speed Networks Introducing the Ethernet Surge Protector, model ETH-SP, from Ubiquiti Networks. The ETH-SP is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti® airMAX® devices already have robust ESD protection built in, adding the ETH-SP to the installation provides an additional layer of protection to the network. The ETH-SP is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility. Ideal for WISP Networks All Ubiquiti airMAX devices are equipped with ESD protection. However, to protect outdoor devices, and to meet certain local code requirements, installing the ETH-SP is essential. For example, to guard against costly service calls, and to help your subscriber installations meet code requirements, install two ETH-SPs: one near the CPE, and the other at the entry point to the building. Damaging ESD attacks and surges will be absorbed by the ETH-SPs and safely discharged into the ground.

Brand: UBIQUITI

Code: ART-108714

MPN

ETH-SP-G2

EAN 00817882023900

stock 349

Your Price

INFO

Ubiquiti Networks POE-54V-80W Gigabit Ethernet 54V PoE adapter

UBIQUITI

ART-77983

MPN: POE-54V-80W-EU

EAN   00810354024597

Ubiquiti Networks POE-54V-80W. Ethernet interface type: Gigabit Ethernet, Ethernet LAN data rates: 10,100,1000 Mbit/s. Colour of product: Black. Power over Ethernet (PoE) voltage: 54 V, Output power: 80 W. Number of products included: 1 pc(s)

Ubiquiti Networks POE-54V-80W Gigabit Ethernet 54V PoE adapter

Ubiquiti Networks POE-54V-80W. Ethernet interface type: Gigabit Ethernet, Ethernet LAN data rates:…

Brand: UBIQUITI

Code: ART-77983

MPN

POE-54V-80W-EU

EAN 00810354024597

Ubiquiti Networks POE-54V-80W. Ethernet interface type: Gigabit Ethernet, Ethernet LAN data rates: 10,100,1000 Mbit/s. Colour of product: Black. Power over Ethernet (PoE) voltage: 54 V, Output power: 80 W. Number of products included: 1 pc(s)

Brand: UBIQUITI

Code: ART-77983

MPN

POE-54V-80W-EU

EAN 00810354024597

stock 26

Your Price

INFO

Microsens Industrial-converter Fast Ethernet 100Base-FX/TX, Single…

Microsens

ART-09664

MPN: MS650426

Fast Ethernet media converter 100Base-FX / 100Base-TX Single mode 1300 nm, 40 km 2 x SC, 1 xRJ45 Power supply, Relay Contacts For the extreme demanding use in industrial environments MICROSENS has developed special media converter. The converter has included several features such as Link Through, ALM, potential free alarm contacts, connector for redundant power supply, cross over switch, solid metal chassis and an extended temperature range. The industrial product range includes beside the Ethernet (10Base-FL/10Base-T) and Fast Ethernet (100Base-FX/100Base-TX) converter of this data sheet also media converter for serial interfaces (RS-232, RS-422, RS-485).

Microsens Industrial-converter Fast Ethernet 100Base-FX/TX, Single…

Fast Ethernet media converter 100Base-FX / 100Base-TX Single mode 1300 nm, 40 km 2 x SC, 1 xRJ45…

Brand: Microsens

Code: ART-09664

MPN

MS650426

EAN -

Fast Ethernet media converter 100Base-FX / 100Base-TX Single mode 1300 nm, 40 km 2 x SC, 1 xRJ45 Power supply, Relay Contacts For the extreme demanding use in industrial environments MICROSENS has developed special media converter. The converter has included several features such as Link Through, ALM, potential free alarm contacts, connector for redundant power supply, cross over switch, solid metal chassis and an extended temperature range. The industrial product range includes beside the Ethernet (10Base-FL/10Base-T) and Fast Ethernet (100Base-FX/100Base-TX) converter of this data sheet also media converter for serial interfaces (RS-232, RS-422, RS-485).

Brand: Microsens

Code: ART-09664

MPN

MS650426

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

Microsens Gigabit Ethernet Media Converter 1000Base-T/1000Base-SX,…

Microsens

ART-09572

MPN: MS400190

Gigabit Ethernet converter 1000Base-T/1000Base-SX, 850 nm Multimode, max. 550 m, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.

Microsens Gigabit Ethernet Media Converter 1000Base-T/1000Base-SX,…

Gigabit Ethernet converter 1000Base-T/1000Base-SX, 850 nm Multimode, max. 550 m, ext. power supply 1…

Brand: Microsens

Code: ART-09572

MPN

MS400190

EAN -

Gigabit Ethernet converter 1000Base-T/1000Base-SX, 850 nm Multimode, max. 550 m, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.

Brand: Microsens

Code: ART-09572

MPN

MS400190

Reorder available

tempo di riapprovigionamento 28 Days

Your Price

INFO

Microsens Gigabit Ethernet Media Converter 1000Base-T/1000Base-LX,…

Microsens

ART-09573

MPN: MS400191

Gigabit Ethernet converter 1000Base-T/1000Base-LX, 1310 nm single mode, max. 10 km, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.

Microsens Gigabit Ethernet Media Converter 1000Base-T/1000Base-LX,…

Gigabit Ethernet converter 1000Base-T/1000Base-LX, 1310 nm single mode, max. 10 km, ext. power…

Brand: Microsens

Code: ART-09573

MPN

MS400191

EAN -

Gigabit Ethernet converter 1000Base-T/1000Base-LX, 1310 nm single mode, max. 10 km, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.

Brand: Microsens

Code: ART-09573

MPN

MS400191

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

Microsense MS400090 200Mbit/s Black

Microsens

ART-09550

MPN: MS400090

Microsense MS400090. Data transfer rate (max): 200 Mbit/s. Networking standards: IEEE 802.3,IEEE 802.3af,IEEE 802.3u, Cabling technology: 10/100Base-TX, 100Base-FX. Connectivity technology: Wired, Interface: 2 x SC, 1 x RJ-45. Colour of product: Black

Microsense MS400090 200Mbit/s Black

Microsense MS400090. Data transfer rate (max): 200 Mbit/s. Networking standards: IEEE 802.3,IEEE…

Brand: Microsens

Code: ART-09550

MPN

MS400090

EAN -

Microsense MS400090. Data transfer rate (max): 200 Mbit/s. Networking standards: IEEE 802.3,IEEE 802.3af,IEEE 802.3u, Cabling technology: 10/100Base-TX, 100Base-FX. Connectivity technology: Wired, Interface: 2 x SC, 1 x RJ-45. Colour of product: Black

Brand: Microsens

Code: ART-09550

MPN

MS400090

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

Microsens pw-over-Ethernet FE Bridge 1x10/100TX 1x100FX, Single Mode…

Microsens

ART-09551

MPN: MS400092

· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop chassis · Segment splitting and speed adaptation · Auto-Negotiation 10/100Base-TX half-/full-duplex-mode manually configurable · Multimode max. 2 km, ST-/SC-connector · Single mode versions up to 125 km · Optional simplex fiber (WDM) · Power Supply integrated Fast Ethernet Bridge10/100Base-TX/100Base-FX, 1310nm Single mode, min. 30 km 2x SC 1x RJ-45 MICROSENS' new Mini Bridge provides a fiber to copper media conversion whilst at the same time - via the 10/100Base-TX port acting as a power supply for active terminal equipment like e.g. WLAN-access points, IP-cameras or IP-phones. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbps speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eliminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home" (FTTH) projects.

Microsens pw-over-Ethernet FE Bridge 1x10/100TX 1x100FX, Single Mode…

· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop…

Brand: Microsens

Code: ART-09551

MPN

MS400092

EAN -

· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop chassis · Segment splitting and speed adaptation · Auto-Negotiation 10/100Base-TX half-/full-duplex-mode manually configurable · Multimode max. 2 km, ST-/SC-connector · Single mode versions up to 125 km · Optional simplex fiber (WDM) · Power Supply integrated Fast Ethernet Bridge10/100Base-TX/100Base-FX, 1310nm Single mode, min. 30 km 2x SC 1x RJ-45 MICROSENS' new Mini Bridge provides a fiber to copper media conversion whilst at the same time - via the 10/100Base-TX port acting as a power supply for active terminal equipment like e.g. WLAN-access points, IP-cameras or IP-phones. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbps speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eliminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home" (FTTH) projects.

Brand: Microsens

Code: ART-09551

MPN

MS400092

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

Microsens Fast Ethernet Media Converter 100Base-TX/100Base-FX,…

Microsens

ART-09552

MPN: MS410640-V2

Media Converter 100Base-FX/100Base-TX, 1310 nm Multimode, 2 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.

Microsens Fast Ethernet Media Converter 100Base-TX/100Base-FX,…

Media Converter 100Base-FX/100Base-TX, 1310 nm Multimode, 2 km, include power supply 2 x SC 1 x…

Brand: Microsens

Code: ART-09552

MPN

MS410640-V2

EAN -

Media Converter 100Base-FX/100Base-TX, 1310 nm Multimode, 2 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.

Brand: Microsens

Code: ART-09552

MPN

MS410640-V2

Reorder available

tempo di riapprovigionamento 17 Days

Your Price

INFO

Microsens Fast Ethernet Media Converter 100Base-TX/100Base-FX, Single…

Microsens

ART-09554

MPN: MS410644-V2

Media Converter 100Base-FX/100Base-TX, 1310 nm Single mode, 15 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.

Microsens Fast Ethernet Media Converter 100Base-TX/100Base-FX, Single…

Media Converter 100Base-FX/100Base-TX, 1310 nm Single mode, 15 km, include power supply 2 x SC 1 x…

Brand: Microsens

Code: ART-09554

MPN

MS410644-V2

EAN -

Media Converter 100Base-FX/100Base-TX, 1310 nm Single mode, 15 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.

Brand: Microsens

Code: ART-09554

MPN

MS410644-V2

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

Microsens Mini Bridge 1x10/100Base-TX, 1x100Base-FX, Single Mode…

Microsens

ART-09545

MPN: MS400162

EAN   MS400162

· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex mode manual configurable · multimode max. 2 km, single mode versions up to 125 km, optional with simplex fiber (WDM) · ST-/SC-connectors, optional LC, VF-45 and MT-RJ Fast Ethernet Bridge 1x10/100TX 1x100FX Single mode 1300nm SC Laser min. 15km 1 x RJ-45 2 x SC The new Mini Bridge of MICROSENS offers an easy and cost effective integration of 10 Mbit/s Ethernet equipment into modern fiber based Fast Ethernet networks. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbit/s speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eleminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home“ (FTTH) projects. With the standard 10/100Base-TX interface, the enduser can use internet services, Video on Demand and VoIP applications.

Microsens Mini Bridge 1x10/100Base-TX, 1x100Base-FX, Single Mode…

· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex…

Brand: Microsens

Code: ART-09545

MPN

MS400162

EAN MS400162

· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex mode manual configurable · multimode max. 2 km, single mode versions up to 125 km, optional with simplex fiber (WDM) · ST-/SC-connectors, optional LC, VF-45 and MT-RJ Fast Ethernet Bridge 1x10/100TX 1x100FX Single mode 1300nm SC Laser min. 15km 1 x RJ-45 2 x SC The new Mini Bridge of MICROSENS offers an easy and cost effective integration of 10 Mbit/s Ethernet equipment into modern fiber based Fast Ethernet networks. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbit/s speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eleminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home“ (FTTH) projects. With the standard 10/100Base-TX interface, the enduser can use internet services, Video on Demand and VoIP applications.

Brand: Microsens

Code: ART-09545

MPN

MS400162

EAN MS400162

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

MikroTik RouterBOARD 912UAG with 600Mhz Atheros CPU, 64MB RAM,…

MikroTik

ART-68238

MPN: RB912UAG-2HPnD

EAN   4752224000712

La RouterBoard RB912 è un router con scheda Wi-Fi ad alta potenza integrata con uno slot aggiuntivo per miniPCIe (per una scheda 802.11 o scheda 3G). La scheda wireless integrata è in grado di erogare fino a 1000mW. Caratteristiche tecniche: 1 Ethernet Gigabit, 1 miniPCIe, USB, Additional memory, Gigabit, High power, Dual chain CPU Atheros AR9342 600MHz network processor Wireless 2.4GHz 802.11b/g/n, 2x MMCX connectors miniPCIe slot for 802.11 or 3G (using 3G disables the USB port), USB 2.0 port PoE: 8-30V DC on Ether1 (Non 802.3af) MikroTik RouterOS, Level4 license (supports wireless AP mode)

MikroTik RouterBOARD 912UAG with 600Mhz Atheros CPU, 64MB RAM,…

La RouterBoard RB912 è un router con scheda Wi-Fi ad alta potenza integrata con uno slot aggiuntivo…

Brand: MikroTik

Code: ART-68238

MPN

RB912UAG-2HPnD

EAN 4752224000712

La RouterBoard RB912 è un router con scheda Wi-Fi ad alta potenza integrata con uno slot aggiuntivo per miniPCIe (per una scheda 802.11 o scheda 3G). La scheda wireless integrata è in grado di erogare fino a 1000mW. Caratteristiche tecniche: 1 Ethernet Gigabit, 1 miniPCIe, USB, Additional memory, Gigabit, High power, Dual chain CPU Atheros AR9342 600MHz network processor Wireless 2.4GHz 802.11b/g/n, 2x MMCX connectors miniPCIe slot for 802.11 or 3G (using 3G disables the USB port), USB 2.0 port PoE: 8-30V DC on Ether1 (Non 802.3af) MikroTik RouterOS, Level4 license (supports wireless AP mode)

Brand: MikroTik

Code: ART-68238

MPN

RB912UAG-2HPnD

EAN 4752224000712

stock 20

Your Price

INFO

Ubiquiti-U-POE-af-EU-UniFi 802.3af Supported PoE Injector

UBIQUITI

ART-112353

MPN: U-POE-af-EU

EAN   00817882024976

Ubiquiti 802.3af Supported PoE Injector

Ubiquiti-U-POE-af-EU-UniFi 802.3af Supported PoE Injector

Ubiquiti 802.3af Supported PoE Injector

Brand: UBIQUITI

Code: ART-112353

MPN

U-POE-af-EU

EAN 00817882024976

Ubiquiti 802.3af Supported PoE Injector

Brand: UBIQUITI

Code: ART-112353

MPN

U-POE-af-EU

EAN 00817882024976

in arrivo

Data	Quantita	Date Confirmed
28.03.25	483	Yes

Your Price

INFO

Page 14 of 20 11 12 13 14 15 16 17 18 19 20