Teltonika-RUT951-LTE dual Sim (Modulo MEDIATEK)

MOBILE

Mobile module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps

SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI,

 

ICCID

SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

Black/White list: Operator black/white list

Band management: Band lock, Used band status display

APN: Auto APN

Bridge: Direct connection (bridge) between mobile ISP and device on LAN

Passthrough: Router assigns its mobile WAN IP address to another device on LAN

Multiple PDN (optional): Possibility to use different PDNs for multiple network access and services (not available in standard FW)

 

WIRELESS

Wireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA)

WiFi security: WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation

SSID: SSID stealth mode and access control based on MAC address

WiFi users: Up to 100 simultaneous connections

Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

 

ETHERNET

WAN: 1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

LAN: 3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

 

NETWORK

Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)

Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)

VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall: Port forward, traffic rules, custom rules

DHCP: Static and dynamic IP allocation, DHCP Relay, Relayd

QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS: Supported >25 service providers, others can be configured manually

Network backup: VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover

Load balancing: Balance your internet traffic over multiple WAN connections

SSHFS (optional): Possibility to mount remote file system via SSH protocol (not available in standard FW)

 

SECURITY

Authentication: Pre-shared key, digital certificates, X.509 certificates

Firewall : Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN: Port and tag based VLAN separation

Mobile quota control: Set up custom data limits for both SIM cards

WEB filter: Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only

Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter

Secure Boot: Cryptographic integrity check of the each system boot process (available on device with special order code RUT950U072C0).

 

VPN

OpenVPN: Multiple clients and server can be running simultaneously, 12 encryption methods

OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

IPsec: IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)

GRE: GRE tunnel

PPTP, L2TP: Client/Server services can run simultaneously

Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code

DMVPN : Method of building scalable IPsec VPNs

SSTP: SSTP client instance support

ZeroTier: ZeroTier VPN

WireGuard: WireGuard VPN client and server support

 

MODBUS TCP SLAVE

ID range: Respond to one ID in range [1;255] or any

Allow Remote Access: Allow access through WAN

Custom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

 

MODBUS TCP MASTER

Supported functions: 01, 02, 03, 04, 05, 06, 15, 16

Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

 

MODBUS DATA TO SERVER

Protocol: HTTP(S), MQTT, Azure MQTT

 

MQTT GATEWAY

MQTT gateway: Allows sending commands and receiving data from MODBUS Master through MQTT broker

 

DNP3

Supported modes: TCP Master, DNP3 Outstation

 

MONITORING & MANAGEMENT

WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

FOTA: Firmware update from server, automatic notification

SSH: SSH (v1, v2)

SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call: Reboot, Status, WiFi on/off, Mobile data on/off, Output on/off

TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT: MQTT Broker, MQTT publisher

SNMP: SNMP (v1, v2, v3), SNMP trap

JSON-RPC: Management API over HTTP/HTTPS

MODBUS: MODBUS TCP status/control

RMS: Teltonika Remote Management System (RMS)

 

IoT PLATFORMS

Cloud of Things: Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx: Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Cumulocity: Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP

Azure IoT Hub: Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP: WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server

 

SYSTEM CHARACTERISTICS

CPU: Mediatek MIPS 24Kc 580 MHz

RAM: 128 MB, DDR2

FLASH storage: 16 MB, SPI Flash

 

FIRMWARE / CONFIGURATION

WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup, restore point

FOTA: Update FW/configuration from server

RMS: Update FW/configuration for multiple devices

Keep settings: Update FW without losing current configuration

 

FIRMWARE CUSTOMIZATION

Operating system: RutOS (OpenWrt based Linux OS)

Supported languages: Busybox shell, Lua, C, C++

Development tools: SDK package with build environment provided

 

INPUT/OUTPUT

Input: 1 x Digital input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high

Output: 1 x Digital open collector output, max output 30 V, 300 mA

Events: SMS, EMAIL, RMS

 

POWER

Connector: 4 pin industrial DC power socket

Input voltage range: 9 – 30 VDC, reverse polarity protection; surge protection >31VDC 10us max

PoE (passive): Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards

Power consumption: < 2 W idle, < 7 W Max

 

PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)

Ethernet: 4 x RJ45 ports, 10/100 Mbps

I/O’s: 1 x Digital Input, 1 x Digital Output on 4 pin power connector (available from HW revision 1600)

Status LEDs: 1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED

SIM: 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)

Power: 1 x 4 pin power connector

Antennas: 2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors

Reset: Reboot/User default reset/Factory reset button

 

PHYSICAL SPECIFICATION

Casing material: Aluminium housing, plastic panels

Dimensions (W x H x D): 110 x 50 x 100 mm

Weight: 287 g

Mounting options: DIN rail (can be mounted on two sides), flat surface placement

 

OPERATING ENVIRONMENT

Operating temperature: -40 °C to 75 °C

Operating humidity: 10% to 90% non-condensing

Ingress Protection Rating: IP30

 

REGULATORY & TYPE APPROVALS

Regulatory: CE/RED, UKCA, CB

 

EMI IMMUNITY

Standards: EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, Final draft EN 301 489-52 V1.2.0, EN 55032:2015+A1:2020, EN 55035:2017+A11:2020, EN 61000-3-3:2013+A1:2019, EN IEC 61000-3-2:2019

ESD: EN 61000-4-2:2009

Radiated Immunity: EN 61000-4-3:2020

EFT : EN 61000-4-4:2012

Surge Immunity (AC Mains Power Port): EN 61000-4-5:2014+A1:2017

CS : EN 61000-4-6:2014

DIP: EN IEC 61000-4-11:2020

 

RF

Standards: EN 300 328 V2.2.2, EN 301 908-1 V13.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1

 

SAFETY

Standards : EN IEC 62311:2020 IEC 62368-1:2018 EN IEC 62368-1:2020+A11:2020