Microsense MS650869PMX-48-V2 network switch L2+ Silver Power over Ethernet (PoE)
Code: DE-023041 MS650869PMX-4 MS650869PMX-48-V2
The 10 port Gigabit Switch is equipped with two 1000Base-SX/LX Gigabit Ethernet fiber optic interfaces and therefore allows the implementation of a fault tolerant optical ring. In case of failure the MICROSENS patented technology assures the reconfiguration of the connection within less than 20 ms.
The Industrial Switch is offering 8 copper ports for the connection of Ethernet terminals like control systems, consoles or further network users. The Gigabit Switch can be configured and monitored by the MICROSENS NMP Management Software, a PC based management tool and, optionaly, SNMP. The implementation of data prioritization (QoS) and VLANs according to IEEE Std. 802.1Q/p are forming a relevant part of the Industrial Switch.
Optionaly, the Gigabit switch is also available with a third Gigabit fiber port (1000Base-SX or LX optional as SFP version).
- Gigabit Ethernet 10 Port Switch, 7x 10/100Base-TX, 1x10/100/1000-T, 2x 1000Base-SX/LX
- 2 Fiber ports for building fault tolerant fiber rings
- Manageable with Device Manager, SNMP optional
- Full VLAN functionality / data prioritization according to IEEE 802.1q
- Reconfiguration time < 20 ms
- Optional with SFP slots
- Robust casing in industrial design with integrated holder for 35 mm DIN rail
The Industrial Switch is offering 8 copper ports for the connection of Ethernet terminals like control systems, consoles or further network users. The Gigabit Switch can be configured and monitored by the MICROSENS NMP Management Software, a PC based management tool and, optionaly, SNMP. The implementation of data prioritization (QoS) and VLANs according to IEEE Std. 802.1Q/p are forming a relevant part of the Industrial Switch.
Optionaly, the Gigabit switch is also available with a third Gigabit fiber port (1000Base-SX or LX optional as SFP version).
- Gigabit Ethernet 10 Port Switch, 7x 10/100Base-TX, 1x10/100/1000-T, 2x 1000Base-SX/LX
- 2 Fiber ports for building fault tolerant fiber rings
- Manageable with Device Manager, SNMP optional
- Full VLAN functionality / data prioritization according to IEEE 802.1q
- Reconfiguration time < 20 ms
- Optional with SFP slots
- Robust casing in industrial design with integrated holder for 35 mm DIN rail
Tech Detail Table
Tech Detail Table
| 10G support | Y |
| Auto MDI/MDI-X | Y |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Cable types supported | Cat5e |
| Copper ethernet cabling technology | 10BASE-T,100BASE-TX,100BASE-T,1000BASE-T |
| DC input voltage | 48 V |
| Depth | 108 mm |
| DIN rail mounting | Y |
| Fast Ethernet (copper) ports quantity | 7 |
| Fiber optic connector | SC,ST |
| Flow control support | Y |
| Gigabit Ethernet (copper) ports quantity | 1 |
| Height | 116 mm |
| Installed SFP modules quantity | 3 |
| International Protection (IP) code | IP30 |
| IPv4 & IPv6 features | Dual stack IPv4/IPv6 |
| LED indicators | Y |
| MAC address table | 8192 entries |
| Manual | Y |
| Mean time between failures (MTBF) | 400000 h |
| Networking standards | IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1w,IEEE 802.1x,IEEE 802.3ab,IEEE 802.3ac,IEEE 802.3i,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
| Operating temperature (T-T) | -40 - 75 °C |
| Power consumption (typical) | 8 W |
| Power over Ethernet (PoE) | Y |
| Product colour | Silver |
| Storage relative humidity (H-H) | 5 - 90% |
| Storage temperature (T-T) | -40 - 85 °C |
| Store-and-forward | Y |
| Switch layer | L2+ |
| Terminal block included | Y |
| Transmission distance (max) | 10 km |
| Virtual LAN features | Tagged VLAN |
| VLAN support | Y |
| Wavelength | 850 nm |
| Web-based management | Y |
| Width | 50 mm |
Viewed